Command Communications ComSwitch 7500 Automatic Phone Line Switch

Command Communications ComSwitch 7500 Automatic Phone Line Switch, Why pay for additional phone lines? Put this switch on duty—and save a bundle. It'll route calls to 4 devices on 1 or 2 phone lines automatically! It works with both 1- and 2-line phones and is compatible with DSL Distinctive Ringing phone-company voice mail and Caller ID. Get max value from your existing phone line. It's a hassle to connect and disconnect your fax and modem every time you use them. Or to try to route incoming calls manually. But it's not very cost-efficient to have dedicated phone lines for both devices—especially when you're only using them intermittently. So what do you do?Share the 1 or 2 lines you already have the easy way! Plug everything into ComSwitch 7500 and let it route your calls to the right device—automatically. This inexpensive line-sharing switch has ports for a 1- or 2-line input and 4 devices. Most folks connect a phone answering machine fax machine and modem but you can also share the line with other devices.Choose voice or data priority.ComSwitch operates in 2 different modes. Set it to AUTOMATIC and it answers every call on the first ring listens for a fax or modem tone then passes the call along to the phone and telephone answering device (TAD) ports if no tone is detected. This is ideal if you receive more data calls than voice calls.If you only have occasional data calls you may prefer to set ComSwitch to SEMI-AUTOMATIC mode. Then each call rings through to the phone answerer and other extensions immediately. When you or your answering machine picks up ComSwitch listens in for a fax or modem tone and directs the call to the appropriate device if it detects one.Switch from phone to fax mid-call!ComSwitch monitors the line so you can switch from phone mode to fax mode while the call is in process by pressing 3 buttons on your telephone dialpad. You might talk for a few minutes then make the transfer to receive a document without disconnectin